Cylinder Shows the number of the hard disk cylinders. Secure the card to the chassis with the screw you removed earlier. The User password is required to boot the system preventing unauthorized use. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. DO NOT place jumper caps on the fan connectors. Make sure to set the partition of the Primary IDE hard disk drives to active.

Uploader: Tojaktilar
Date Added: 22 June 2010
File Size: 58.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 4143
Price: Free* [*Free Regsitration Required]

Asus K8N4-E Specifications |

Incorrect settings may cause the system to fail to recognize the installed hard disk. Assign an IRQ to the card.

Sector Shows the number of sectors per track. Restart the system after the utility completes the updating process.

Never connect a 1 3 9 4 c a b l e to the USB connectors. These documents are not part of the standard package. If the hard disk was already formatted on a previous system, the etherneet BIOS may detect incorrect parameters. Fail Detecting floppy drive A media The DIMM might get damaged when it flips out with extra force.


If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on etherjet sub-menu. Asus computer hardware – motherboard user manual pages. Find the proper orientation and push down firmly until the connectors completely fit. A clicking sound denotes that the retention bracket is in place.

Page 53 Restart the system after the utility completes the updating process.

Boot the system in DOS mode using the bootable floppy disk you created earlier. Turn on the system. ASUS Update utility 2. This section explains how to configure your system using this utility. The following message appears: Remove the bracket opposite the slot that you intend to use. If possible, disconnect all power cables from the existing system before you add a device. Press any key to continue By pressing ‘print’ button you will print only current page. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced.

Save the BIOS file to a floppy disk, then restart the system. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism Cylinder Shows the number of the hard disk cylinders. Align the card connector with the slot and press firmly until the card is completely seated on the slot.


The values range from to Memory is prevented from running faster than this frequency.

Orient the red markings on the floppy ribbon cable to PIN 1. Incorrect field values can cause the system to malfunction.

ASUS K8N4-E – motherboard – ATX – Socket 754 – nForce4 4X

Connect one end of the chassis intrusion sensor or switch cable to this connector. This chapter describes the motherboard features and the new technologies it supports. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.